Is builder's risk insurance expensive?

Editorial team Published on

Builder's risk insurance typically costs between 1% and 5% of the total construction or renovation budget. Whether that is expensive depends on the size of your project, but basic policies often start around $375 to $500 for smaller jobs, while larger or higher-risk builds can range from $1,000 to over $10,000.

Cost Breakdown

  • Percentage Rate: Most standard policies charge 1% to 5% of the completed project's total value (including labor and materials, but excluding land).
  • Example: For a $300,000 build, a 2% rate equals a $6,000 premium.
  • Minimum Premiums: Many carriers enforce a baseline minimum policy cost of roughly $375 to $425, meaning small projects and larger ones can share a similar starting floor.

Key Cost Factors

  • New Construction vs. Renovation: Remodeling an existing structure is often more expensive to insure because it introduces risks like older utility systems or damage to existing property.
  • Location: Building in areas prone to natural disasters (such as coastal windstorms, heavy hail, or wildfire zones) drives up the price significantly.
  • Project Duration: Policies are sold for specific timelines (3, 6, or 12 months); longer projects cost more, and extending a delayed project can add extra fees.
  • Materials Used: Wood-frame construction typically carries higher fire risks and higher rates than steel or concrete.

You can check out guidance and calculators via providers like US Assure or read detailed breakdowns on Batesia to estimate costs for your specific project type.

Is builders risk insurance worth it?

Yes, builder's risk insurance is worth it because standard homeowners or commercial property insurance policies exclude active construction sites and large remodels. Without it, you must pay out of pocket if theft, fire, or severe weather destroys your uncompleted project.

What Builder's Risk Insurance Covers

  • Physical Structure: Repairs for damage to framing, foundations, and installations caused by fire, wind, hail, or vandalism.
  • Materials and Equipment: Replacement costs for stolen or damaged building supplies stored on-site or in transit.
  • Soft Costs: Extra expenses from delays, such as additional loan interest, real estate taxes, or permit fees.
  • Project Documents: Protection for blueprints, specs, and design schematics.

Why Your Contractor’s Policy Is Not Enough

  • General Liability: Only protects the contractor if they cause third-party injuries or damage adjacent property; it does not pay to rebuild your house.
  • Workers' Compensation: Only covers medical costs for injured employees on the job site.
  • Financial Risk: You hold the final financial stake in the property, making a dedicated policy essential.

To evaluate providers and review policy options, you can research details through resources like NerdWallet's Builder's Risk Guide.

Who typically pays for builder's risk insurance?

Builder's risk insurance is typically paid for by either the property owner (or developer) or the general contractor, depending on what is written in the construction contract.

📌 Who Pays and Why

  • 🏠 Property Owner / Developer
    • Why: They hold the largest financial stake in the unfinished property.
    • How: They buy the policy directly or pay the contractor back as part of the project fees.
  • 👷 General Contractor (GC)
    • Why: The construction contract assigns them the duty to secure and pay for coverage.
    • How: They roll the insurance cost into their overall bid or contract price.

📊 Comparison of Responsibility Options

OptionWho PurchasesWho Pays the PremiumBest Used When
Owner-ProvidedProperty OwnerProperty OwnerThe owner is financing or wants direct policy control.
Contractor-ProvidedGeneral ContractorContractor (billed to owner)The contract delegates risk management to the builder.

💡 Important Best Practices

  • Check the contract: The final legal agreement always decides who carries the financial burden.
  • Add everyone: Whichever party pays, all other vested parties (subcontractors, lenders, and architects) should be listed as "additional insureds".

How much does $1,000,000 in contractor insurance cost?

A $1,000,000 contractor general liability insurance policy costs between $40 and $160 per month (or roughly $500 to $2,000 per year) for most small-to-midsized operations.

Your final premium varies significantly based on your specific trade, revenue, and claims history.

Average Monthly Costs by Trade

Because insurance premiums are tied directly to the physical risks of the job, different contractor specialties pay different amounts for the exact same $1M/$2M (per-occurrence/aggregate limit) coverage. Data from leading digital insurance marketplaces like Simply Business and NEXT Insurance outline the typical median monthly costs:

Trade TypeMedian Monthly Cost
Landscaper$32 – $36
Electrician$36 – $40
Painter$45 – $50
Handyperson$50 – $55
General Contractor (GC)$75 – $83
Plumber$90 – $95
Roofer$200+

Note: Solo independent contractors or consultants working entirely off-site without high-risk equipment often see rates as low as $29 per month.

Key Factors that Drive the Cost Up or Down

Insurance carriers calculate your specific rate using a few primary metrics:

  • Payroll & Revenue: Higher gross sales and larger crews mean more active job sites and higher risk exposure. For major commercial contractors with multiple employees, premiums can jump to several thousand dollars annually.
  • Subcontractor Usage: If you hire out significant portions of your projects to subcontractors, your premium will increase unless you can prove they carry their own adequate insurance.
  • Location: Densely populated states or regions with higher local claim frequencies and steep legal court costs command higher premiums.
  • Claims History: A clean track record scores preferred tier pricing, while prior claims signal high risk and immediately drive rates up.

Per Occurrence vs. Aggregate Limits

When you buy a "$1 million policy," you are typically buying a $1M per-occurrence / $2M aggregate policy. This means the insurer will pay a maximum of $1,000,000 for a single claim, and up to $2,000,000 total over the course of the 1-year policy term. Moving your aggregate limit from $2 million up to $4 million usually only adds a few dollars to your monthly payment.

How long does a builder's risk policy last?

A builder's risk policy typically lasts for 3, 6, or 12 months, matching the expected duration of the construction project.

Typical Policy Terms

  • Short-term projects: Small renovations or repairs last 3 to 6 months.
  • Long-term projects: New ground-up construction or large commercial builds usually require 12 months or longer.
  • Extensions: Policies can be extended or renewed if a project faces delays, provided you request the extension before the expiration date.

When Coverage Ends

Coverage does not always wait for the official policy end date. It typically terminates early upon the first occurrence of:

  • Project completion: When the building is finished or a certificate of occupancy is issued.
  • Occupancy: When the building is put to its intended use or occupied for 30 to 60 days without written insurer consent.
  • Abandonment: If construction is halted and the site is abandoned.
  • Expiration: When the policy term ends without an official renewal.

Builder’s Risk Insurance: Complete Guide Explained

9 related questions found

How much should a builder's risk policy cost?

A builder's risk insurance policy typically costs between 1% and 4% of the total completed project value, with most standard residential projects ranging from $400 to $5,000 per year (or a carrier minimum of about $375 to $425).

📊 Cost Breakdown by Project Type

Rates scale directly with your construction budget and risk factors. Here is how typical premiums break down for a 6-to-12-month term based on whether you are building new or renovating:

Project Value🏗️ New Construction (~0.5%–1%)⚠️ Renovation / Remodel (~1%–4%)
Under $150,000$500 to $750$1,000 to $1,500
$150,000 to $500,000$750 to $2,500$1,500 to $5,000
$500,000 to $1,000,000$2,500 to $5,000$5,000 to $10,000

📌 Key Cost Drivers

  • Scope: Renovations cost up to 60%+ more than new builds because they expose existing structures and older building systems to damage.
  • Location: Sites in disaster-prone regions (coastal wind zones, wildfire areas) require surplus lines/E&S coverage, adding 5% to 10% in taxes and fees.
  • Materials: Fire-resistive materials (steel, concrete) command lower rates than wood-frame construction.
  • Hidden Fees: Watch out for carrier administrative policy fees ($50–$250) and surplus lines taxes (3%–6%).

What does builder's risk not cover?

Builder's risk insurance does not cover liability, worker injuries, faulty workmanship, or natural disasters like floods and earthquakes without special add-ons.

Common Exclusions

  • Liability and injuries: It does not pay for third-party injuries on the site or medical bills for injured workers; you need general liability and workers' compensation for that.
  • Faulty work and design flaws: It excludes the cost of fixing poor construction, bad materials, or architectural errors (though resulting damage to other parts of the project may sometimes be covered).
  • Theft by workers: Losses caused by employees, subcontractors, or other insured parties on the job are typically excluded.
  • Natural disasters: Standard policies omit coverage for floods, earthquakes, and wind-driven water unless you buy a separate endorsement.
  • Normal wear and tear: Gradual damage, rust, corrosion, and maintenance issues are not covered.
  • Tools and equipment: Heavy machinery or subcontractor gear often requires separate equipment floaters.

Is builders risk insurance a better option than homeowners insurance?

Builders risk insurance is not a "better" option than homeowners insurance; rather, they serve completely different phases of a property's life and are used for entirely different situations.

  • Builders risk insurance is required when a home is actively under major construction, ground-up new construction, or undergoing a heavy remodel.
  • Homeowners insurance is required once a home is completed and occupied.

Standard homeowners insurance policies typically exclude or limit coverage for uninstalled building materials, theft of materials on site, and damages occurring while a property is vacant or under major renovation. Therefore, you cannot simply choose one over the other—you need the policy that matches the current state of your home.

Key Differences

  • Purpose: Builders risk covers the physical structure and uninstalled materials while being built or heavily remodeled. Homeowners insurance covers a completed, lived-in home, personal belongings, and liability.
  • Timeline: Builders risk is a temporary policy (lasting 3 to 12 months) tied to the construction project. Homeowners insurance is an ongoing, annual policy.
  • Materials and Transit: Builders risk usually covers building materials stored off-site, in transit, or owned by suppliers and subcontractors. Homeowners insurance does not.
  • Occupancy & Liability: Homeowners insurance includes comprehensive personal liability and additional living expenses. Standalone builders risk focuses mostly on property damage and may require separate liability endorsements or a general liability policy from your contractor.

Is there another name for builders risk insurance?

Builders risk insurance is most commonly called course of construction insurance.

Alternative Names

  • Course of construction insurance: The most frequent alternative name used by insurance companies.
  • Builder's risk property insurance: A descriptive variation emphasizing that it is a form of property coverage.
  • Inland marine coverage: Sometimes classified under this broader insurance category because it covers property that is often mobile or temporarily located at a specific site.
  • Contractor's all risk (CAR) insurance: A term often used internationally or for larger commercial projects, though CAR policies can sometimes include broader liability elements depending on the terms.

What's the best insurance for contractors?

The best insurance for contractors depends on your specific trade and business size, but top-rated providers like Erie Insurance offer standout coverage limits, The Hartford excels in professional liability, and Next Insurance provides fast, fully online custom packages.

Top Insurance Providers for Contractors

  • Erie Insurance: Best overall for general contractors due to high liability limits and strong customizable packages.
  • The Hartford: Best for specialized risk management, industry expertise, and professional liability.
  • Next Insurance: Best for small businesses, independent operators, and freelancers needing quick digital quotes and instant Certificates of Insurance (COIs).
  • Chubb: Best Business Owner’s Policies (BOPs) for lower-revenue operations requiring tailored high-end coverage.

Essential Types of Contractor Insurance

  • General Liability Insurance: Covers third-party bodily injury, accidental property damage, and related legal fees.
  • Workers’ Compensation: Pays for medical care and lost wages if your W-2 employees get hurt on the job.
  • Commercial Property / Tools & Equipment: Protects your physical gear, specialized tools, and materials against theft, fire, or damage.
  • Business Owner’s Policy (BOP): Bundles general liability, property, and business interruption coverage together at a lower cost.