What is an example of a point-to-point network?
Asked by: Elissa Macejkovic IV | Last update: September 13, 2025Score: 4.9/5 (30 votes)
What is an example of a point-to-point system?
For example, a wired system that connects two computers together can be thought of as a point-to-point link. This is in contrast to a broadcast system where one system connects multiple other devices. A good example of a point-to-point system is a telephone call where only two people are connected and communicating.
What is an example of point-to-point network topology?
Examples of Point to Point Topology
Direct cable connection between two computers. Fax machine transmitting data to another fax machine. Dedicated phone line connection between two modems. Satellite communication link between two ground stations.
What is an example of a point-to-point interconnect?
A popular example of Point-to-Point interconnection is Intel's QuickPath Interconnect (QPI) system. There are 3 significant characteristics of QPI: Multiple direct connections: Multiple components within the system has direct pairwise connections to other components.
What is an example of point-to-point communication system?
The most prominent example of point to point communication is a simple telephone call, where one phone is connected with another, and both nodes can send and receive audio.
Wireless Bridging Between Buildings
What is point-to-point network example?
In telecommunications, a point-to-point connection refers to a communications connection between two communication endpoints or nodes. An example is a telephone call, in which one telephone is connected with one other, and what is said by one caller can only be heard by the other.
What is an example of point to?
phrasal verb
She pointed to me and asked me to stand up. The prosecution is unable to point to anything that proves its case. I can point to several past accomplishments that show that I can perform the job well. All the evidence points to him as the murderer.
What is an example of a point to point protocol?
One such example is Ethernet. The PPPoE and L2TP protocols enable support for transmission of PPP packets over Ethernet. A PPP implementation may include support for a PPP client and a PPP server, perhaps even being utilized as both at the same time.
What is an example of point-to-point configuration?
Point to point in this context means that the subnet needs to provide just enough addresses for the two routers on the link. Using a /30 would fulfill the requirement. For example you could use 192.168. 45.0/30 (192.168.
What is an example of a point-to-point WAN?
Point-to-point WAN
In a point-to-point WAN environment, two LANs or end nodes are connected through a dedicated and secure leased line. Old school broadband networks using dial-up technology are a good example of point-to-point WAN.
What is an example of a point-to-point and multipoint connection?
Examples of Point-to-Point systems are traditional wireline modem systems such as those that use voice-band modems and xDSL modems. Examples of Point-to-Multipoint systems are traditional LAN systems such as wireline LANs (Ethernet, HomePNA, Homeplug®, etc).
Where is mesh topology used in real life?
Mesh topology is used in a variety of settings including Wide Area Networks (WANs), the internet backbone, local area networks (LANs), wireless networks, and home automation systems. IoT devices, like smart home devices and wearable technology, often use mesh networks to connect and communicate reliably.
What is an example of a network access point?
The most common example of a multifunction AP is the wireless router supplied by ISPs to home users. These devices are a combination of three networking devices, namely, an access point, an Ethernet switch, and a router.
What is point to point model example?
The point-to-point model is used widely by low-cost carriers, including Allegiant Air and Southwest Airlines in the U.S., and European carriers such as Ryanair, easyJet and Wizzair, along with some low-cost carriers in Asia like AirAsia, Lion Air and VietJet Air, for example.
What is an example of a point-to-point correspondence?
So, if point-to-point correspondence describes when the antecedent stimulus matches the beginning, middle and end of a response, we could say that the response of writing "cat" after reading "cat" exhibits point-to-point correspondence.
What is a point-to-point wireless network?
Point to Point wireless is a data connection between two points (known as “end points”). The connection is delivered wirelessly through either radio waves or optical laser, and so does not require the use of poles or cables.
What are the examples of point-to-point topology?
A point-to-point topology is any network that connects two hosts in a dedicated fashion. For example, if you were to configure a router in Miami, Florida, to connect and use resources on a network in Atlanta, Georgia, you would want to make sure you had a link between them that can support your needs.
What is an example of a point-to-point line configuration?
The most common example for Point-to-Point connection (PPP) is a computer connected by telephone line. We can connect the two devices by means of a pair of wires or using a microwave or satellite link. Example: Point-to-Point connection between remote control and Television for changing the channels.
What is point-to-point circuit example?
Examples of point-to-point communication links are leased phone lines, microwave relay links, and two way radio. These are all provided as a carrier grade service.
What is an example of point-to-point?
Many examples of point-to - point communications networks include leased wires, microwave relay links and two-way radio. Radio and television broadcasting are examples of point to multipoint communication systems. The Point to Point Protocol (PPP) is used to create direct communication between two nodes in the network.
How to fix a PPP connection?
- Ensure that the user ID and password are entered using the same case.
- Ensure that the authentication protocol used by the peers is the same.
- Do not use PAP at one peer, while the other peer is configured as CHAP.
Is the Point-to-Point Protocol still used?
PPP (Point-to-point protocol) is a WAN protocol that is often used on point-to-point links. Originally, PPP was often used for dial-up connections. Nowadays it's still used for DSL with PPPoE (PPP over Ethernet) and PPPoA (PPP over ATM).
What is a real life example of a point?
A point has no dimensions, such as length, breadth or thickness. Some common examples are: a star in the sky, the tip of a compass, the sharpened end of a pencil, the pointed end of a needle, starting point of a race, corner of a bond paper, and the tip of the scissor.
What is an example of a point to point essay?
An example of a point-by-point comparative essay would be comparing two cars being considered for purchase. The cost of both vehicles would be discussed before then moving on to the performance of each car, and the paper might end with discussing the required maintenance and potential expenses of each car.
What is an example of point to point transport?
A ride-hail service is a P2P transport service obtained through a phone or application booking. A car-pool service is when a private car owner offers commuters a lift in their private car, to a destination that is along their way.