What is modifier 24 and 25?

Editorial team Published on

CPT modifiers 24 and 25 are medical billing codes used to report separate Evaluation and Management (E/M) services, with modifier 24 covering unrelated visits during a post-operative global period and modifier 25 covering separate services on the same day as a procedure.

Modifier 24

  • Usage & Rules: Appended to an E/M code for visits during a global surgical period that address a new, distinct issue unrelated to the original surgery's routine recovery or complications. More details can be found at AAPC.

Modifier 25

  • Usage & Rules: Appended to an E/M code when a medically necessary, distinct E/M service is performed on the same day as a procedure, exceeding routine pre- and post-procedure care. Further information is available via Go Healthcare LLC.

When to use modifier 24 vs 25?

Use Modifier 24 for an unrelated evaluation and management (E/M) visit during a global postoperative period, and use Modifier 25 for a significant, separately identifiable E/M service performed on the same day as a procedure.

When to Use Modifier 24

  • Timing: Anytime during the 10-day or 90-day global post-surgery period.
  • Purpose: For an office visit or E/M service that is completely unrelated to the original surgery.
  • Key Rule: Never use it for routine post-op care or complications tied to the original surgery. It applies only to E/M codes.
  • Example: A patient is in the 90-day global period following knee surgery and sees the same surgeon for a new, unrelated kidney stone issue.

When to Use Modifier 25

  • Timing: On the exact same day as a minor procedure or service.
  • Purpose: For an E/M visit that is significant and separately identifiable from the routine work bundled into the procedure itself.
  • Key Rule: The provider must perform extra work that goes beyond the normal pre- or post-service care of that specific procedure.
  • Example: A patient visits the doctor for a routine problem, and the doctor decides to perform a minor skin lesion removal during that same visit.

Quick Comparison

FeatureModifier 24Modifier 25
When it happensDays or weeks after surgery (during the global period)On the same day as a procedure
The core questionIs this visit unrelated to the prior surgery?Did this E/M work exceed normal pre/post care?
Common useSeparate problem managed during a global windowEvaluation that leads to or accompanies a minor procedure

What is modifier 24 used for?

Modifier 24 is used in medical billing to report an unrelated evaluation and management (E/M) service performed by the same physician (or a qualified health care professional in the same group and specialty) during the global post-operative period (10 or 90 days) of a previous procedure.

When to Use Modifier 24

  • Unrelated conditions: The patient presents with a totally new, unrelated problem or diagnosis supported by a different ICD-10 code.
  • Underlying conditions: The visit is exclusively for managing the underlying condition that prompted the surgery, rather than routine post-operative checks.
  • Specialty management: The surgeon is managing active immunosuppressant therapy for a transplant or chemotherapy during a post-op window.

When NOT to Use Modifier 24

  • Surgical complications: Do not use it for treating infections, wound care, or removing sutures, as these are bundled into the original global surgical package.
  • Same-day services: Do not use it for services rendered on the same day as the procedure (use Modifier 25 instead).
  • Related care: Do not use it if the medical record indicates the visit relates in any way to the recovery, outcome, or management of the original surgery.

For more details on claim rules, check the official guidelines from Novitas Solutions or the American Urological Association.

What is modifier 25 used for?

Modifier 25 is used in medical billing to report a significant, separately identifiable Evaluation and Management (E/M) service performed by the same physician on the same day as a procedure.

Key Rules for Modifier 25

  • Appended to E/M Only: It is attached only to the E/M code (such as an office visit), not to the procedure code itself.
  • Beyond Normal Care: The evaluation must go above and beyond the usual pre-operative and post-operative care tied to the procedure.
  • Different Diagnoses Not Required: The E/M service and the procedure do not need to have different diagnosis codes.
  • Clear Documentation: The medical record must clearly show distinct notes and independent medical decision-making for the extra visit.

Common Examples

  • A patient comes in for a routine preventive exam, but during the visit, they present a new, acute problem that requires separate evaluation and treatment.
  • A doctor evaluates a new injury or skin lesion and performs a minor surgical removal on the same day.

Can you use modifier 25 with 99214?

Yes, you can use Modifier 25 with CPT code 99214 when you perform a significant, separately identifiable evaluation and management (E/M) service on the same day as a procedure or other service.

When to Use Modifier 25 with 99214

  • Separate Service: The E/M work must go above and beyond the usual pre- and post-procedure care.
  • Distinct Reason: You address a separate medical problem or perform a complete Level 4 evaluation for a distinct issue during the same visit.
  • Common Examples: You evaluate and adjust medications for an acute issue like worsening migraines or hypertension, and you also perform a minor procedure such as a joint injection or skin biopsy on that same day.

Rules for Proper Billing

  • Never by Itself: Do not bill 99214 with Modifier 25 as the only code on a claim; it must be attached to the E/M code when billed alongside a separate procedure code.
  • Clear Documentation: Your medical record must clearly show that the evaluation was distinct, medically necessary, and supported by the level of medical decision-making or time.

MODIFIER 24 FOR EVALUATION AND MANAGEMENT EXPLAINED MEDICAL CODING

9 related questions found

When not to use modifier 25?

Do not use CPT modifier 25 when the evaluation and management (E/M) service is an integral, routine part of a procedure or when the visit's sole purpose is to perform that procedure.

When Not to Use Modifier 25

  • Routine Pre-operative or Post-operative Care: Do not use it for standard, expected pre-op exams (like getting basic consent) or routine post-op checkups that are already included in the global fee of a procedure.
  • Sole Purpose is a Procedure: Do not use it when a patient comes in just for a minor procedure (such as a simple lesion removal) and there is no separate, medically necessary E/M service provided.
  • Decision for Major Surgery: Do not use modifier 25 when an E/M visit results in the decision to perform a major surgery with a 90-day global period; use modifier 57 instead.
  • No Separate Documentation: Do not use it if the medical record does not clearly show a distinct, stand-alone problem and separate medical decision-making that goes beyond the normal work of the procedure.
  • Inappropriate Codes: Do not append modifier 25 to code G2211 or code 99211.
  • Different Specialties / Providers: Do not use it if the E/M service and the procedure are performed by different, unrelated specialties or separate group practices where rules do not allow it.
  • Scheduled Procedures without New Issues: Do not use it for a pre-scheduled, routine procedure where no new, distinct symptoms or unexpected problems are evaluated during the encounter.

You can review the official guidance provided by the American Medical Association for more details on correct billing practices.

How much does modifier 25 pay?

Modifier 25 does not have a fixed dollar payout; instead, it triggers 100% reimbursement for a separate evaluation and management (E/M) service. When applied correctly, it signals to the payer that a significant, separately identifiable E/M service was performed by the same clinician on the same day as a minor procedure or preventive visit.

However, the actual payout depends on your specific payer policies, geographic location, and contractual fee schedules. The reimbursement environment for Modifier 25 operates as follows:

1. Traditional Medicare Policy

  • Current Standing: Traditional Medicare pays 100% of the allowed fee schedule amount for both the minor procedure and the E/M service with Modifier 25, provided the documentation fully supports medical necessity.
  • Proposed Rule (CY 2027): The Centers for Medicare & Medicaid Services (CMS) has proposed a 50% payment reduction under the Multiple Procedure Payment Reduction (MPPR) framework. Under this proposal, the highest-valued service would be paid at 100%, and the lower-valued service (the E/M visit or the procedure) would be cut by 50%. A final ruling on this proposal is expected in late 2026.

2. Private Insurance Policies

Many major private commercial insurers have already deviated from traditional Medicare and implemented internal cost-containment policies:

  • 50% Fee Reductions: Payers such as Blue Cross Blue Shield of Michigan, Blue Shield of California, and Horizon BCBS automatically slash the reimbursement of the E/M code by 50% when billed on the same day as a minor procedure (0 or 10-day global period).
  • Preventive vs. Problem-Oriented Visits: If an E/M code with Modifier 25 is appended to a sick/problem visit performed during a routine yearly physical, most commercial payers pay the preventive code at 100% and reduce the problem visit to 50%.

Strict Documentation Rules

To receive any payment for a Modifier 25 claim and survive subsequent audits, the clinical chart must prove that the E/M work was distinct and went above and beyond the routine pre-operative and post-operative care inherent to the procedure itself. While a separate diagnosis code is not strictly mandatory, the documentation must clearly delineate the standalone medical decision-making or extra time spent.

Can you use a 24 and 25 modifier together?

Yes, modifiers 24 and 25 can be reported together on the same claim, but only in specific, rare clinical scenarios.

You can apply both modifiers to the same Evaluation and Management (E/M) service code when a patient is in the global postoperative period of an earlier, unrelated surgery, and they return for a new, unrelated problem that requires both a significant E/M service and a separate minor procedure on that same day.

When You Can Use Them Together

  • Modifier 24 is attached to the E/M code to show that the visit happens during an active global surgical period, but the service is completely unrelated to the original surgery.
  • Modifier 25 is also attached to that same E/M code to show that the evaluation is significant, separately identifiable, and goes beyond the usual pre- or post-service work tied to the minor procedure performed on that same day.

Example Scenario

A patient is recovering from a recent knee surgery (currently in a 90-day global period with the same orthopedic surgeon). They return to the clinic complaining of an unrelated acute skin infection on their hand. The doctor evaluates the hand infection (warranting an E/M code with modifier 24 because it is during the knee surgery's post-op period, and modifier 25 because it is distinct from the minor procedure done today) and performs a minor incision and drainage of the hand abscess on the same day.

Billing and Sequencing Tips

  • Placement: Both modifiers 24 and 25 are applied directly to the single E/M code.
  • Sequencing: List Modifier 24 first before other modifiers to match standard primary postoperative computer edits.
  • Documentation: Ensure your clinical notes clearly defend why the visit is unrelated to the past surgery and why the E/M work is distinct from the minor procedure performed on the same date.

What are the differences between modifiers 24 and 25 in medical billing?

CPT modifiers 24 and 25 are medical billing codes used to report separate Evaluation and Management (E/M) services, with modifier 24 covering unrelated visits during a post-operative global period and modifier 25 covering separate services on the same day as a procedure.

Modifier 24

  • Usage & Rules: Appended to an E/M code for visits during a global surgical period that address a new, distinct issue unrelated to the original surgery's routine recovery or complications. More details can be found at AAPC.

Modifier 25

  • Usage & Rules: Appended to an E/M code when a medically necessary, distinct E/M service is performed on the same day as a procedure, exceeding routine pre- and post-procedure care. Further information is available via Go Healthcare LLC.

What CPT codes can use modifier 24?

Modifier 24 is used exclusively with Evaluation and Management (E/M) services and general ophthalmological (eye examination) services performed during a post-operative global period for a reason unrelated to the original surgery.

Rather than specific individual procedure codes, it applies to entire ranges of E/M and eye exam codes provided by the same physician or qualified healthcare professional (or same group/specialty) during a 10-day minor or 90-day major global period.

Applicable Code Ranges

  • Office/Outpatient E/M Services: 99202 – 99215
  • Inpatient/Observation Care & Consultations: 99221 – 99239, 99251 – 99255
  • Emergency Department Services: 99281 – 99288
  • Nursing Facility & Home Services: 99304 – 99340
  • Prolonged Services & Care Management: Select general E/M codes up to 99499
  • General Ophthalmological Services: 92002 – 92014 (eye exam codes)

Key Restrictions

  • Do not use on surgical or procedure codes: Modifier 24 cannot be appended to actual surgical procedures, minor procedures, or diagnostic tests.
  • Do not use on Critical Care codes: Critical care codes (99291 and 99292) are excluded from modifier 24; use the FT modifier instead for unrelated critical care during a post-op period.
  • Must be truly unrelated: Documentation and a distinct secondary diagnosis code (ICD-10) are typically required to prove the visit addresses a separate condition, a new problem, or management of an underlying disease rather than routine recovery.

You can review further details on the official Modifier 24 Fact Sheet from Novitas Solutions or guidance available at the AAPC Knowledge Center.