What to do when your dishwasher leaks?


Editorial team Published on

To fix a leaking dishwasher, first disconnect the power at the breaker, shut off the hot water valve under the sink, and use towels to clean up standing water.

1. Fix Leaks at the Front Door or Bottom Corners

  • Clean or replace the door gasket: Inspect the rubber seal around the door. Wipe away food debris, and press any dislodged sections back into the groove. If the seal is torn, cracked, or brittle, pull it out and install a new manufacturer-approved replacement part matching your dishwasher's model number.
  • Check the bottom tub seal: A common cause of front leaks is a worn flexible lip seal under the front edge of the door opening. Pull the old seal straight down to remove it, and push the new OEM replacement into the groove.
  • Level the appliance: If the unit leans too far forward or is unlevel, water can pool and spill over the front. Adjust the leveling legs at the bottom until the unit is square and the door closes evenly.

2. Fix Leaks Underneath or at the Back

  • Inspect water supply lines: Remove the lower toe-kick access panel. Check the water supply connection and inlet valve. Hand-tighten loose fittings or gently snug them with pliers, replacing the rubber gasket or line if it is cracked.
  • Examine drain hoses: Look under the sink and behind the lower access panel for loose drain hose connections. Tighten any loose hose clamps with a screwdriver or wrench.

3. Check for Excess Suds

  • Use proper detergent: Running regular hand dishwashing liquid inside the machine creates an extreme amount of suds that force water out of the door and vents. Always use automatic dishwashing detergent.