When to use POS 10?

Editorial team Published on

Use Place of Service (POS) Code 10 for telehealth services when the patient is located in their personal home or a non-facility residential setting at the time of the virtual visit.

When to Use POS 10

  • Patient Location: The patient must be physically located in their private residence (permanent or temporary), or a non-facility environment like a workplace or vehicle where they do not normally receive institutional medical care.
  • Service Type: The encounter must be conducted remotely using telecommunication technology, such as synchronous audio-video (commonly paired with modifier 95) or audio-only interactions (with proper modifiers).
  • Reimbursement Rate: Billing with POS 10 signals a non-facility setting, which generally qualifies for the non-facility payment rate under Medicare and major insurers (reflecting that practice expenses and overhead are handled by the provider's side rather than a host facility).

When NOT to Use POS 10

  • Do not use POS 10 if the patient is physically present at a hospital, clinic, skilled nursing facility, or other institutional medical setting. For those off-home facility locations, use POS 02 instead.

What is POS-10 used for?

In medical billing and coding, POS 10 is a two-digit Place of Service code used to indicate that a telehealth service was delivered while the patient was physically located in their home (private residence).

Key Details About POS 10

  • Full Name: Telehealth Provided in Patient's Home
  • Where It Is Used: Entered in Box 24B of the standard CMS-1500 professional claim form.
  • Reimbursement Impact: It triggers the higher non-facility payment rate under the Medicare Fee-for-Service claims guidelines because providers bear the overhead practice expenses.

POS 10 vs. POS 02

  • POS 10: Use when the patient is at their personal home during the virtual visit.
  • POS 02: Use when the patient receives telehealth from a location other than their home (such as a clinic, office, or facility), which typically reimburses at a lower facility rate.

What is the difference between POS 10 and 11?

Place of Service (POS) code 10 represents telehealth services provided while the patient is in their home, whereas POS code 11 represents traditional, in-person care delivered in a physician's office.

Key Differences Between POS 10 and POS 11

  • Definition:
    • POS 10: Telehealth provided in the patient's home (a private residence).
    • POS 11: Office, meaning an in-person ambulatory setting in a physician's private practice or standalone clinic.
  • Service Type:
    • POS 10: Used strictly for remote telehealth encounters via real-time audio-video or audio-only communication.
    • POS 11: Used for physical, face-to-face visits where the patient goes directly to the doctor's office.
  • Billing and Compliance Risks:
    • Using POS 11 for a telehealth visit creates a setting mismatch that frequently triggers claim denials or audits.
    • Proper coding via the CMS Place of Service Code Set ensures accurate reimbursement rates.

Is POS 10 still valid?

Yes, Place of Service (POS) code 10 is still fully valid and actively required by CMS and major insurers for home-based telehealth services.

Key Rules for POS 10

  • Definition: Use POS 10 when a patient receives telehealth services while physically located in their home (permanent or temporary residence).
  • Payment Rate: POS 10 triggers the higher non-facility payment rate under the Medicare Physician Fee Schedule because the provider bears the practice overhead.
  • POS 10 vs. POS 02: Use POS 10 strictly for home-based telehealth. Use POS 02 for telehealth provided when the patient is in a facility or location other than their home (like an office or clinic).
  • Payer Policies: While Medicare and many commercial carriers accept POS 10, some private insurance companies still require POS 02 for all telehealth claims, so always verify individual payer guidelines.

Can 99214 be billed with POS 10?

Yes, CPT code 99214 can be billed with Place of Service (POS) 10 for telehealth services when the patient is located in their home.

Billing Requirements

  • Place of Service: Use POS 10 to indicate telehealth services provided while the patient is in their home (which applies non-facility pricing).
  • Modifiers: Append Modifier 95 for synchronous real-time audio-video communication. If using audio-only where permitted by specific non-Medicare payers, check requirements for Modifier 93.
  • Documentation: The encounter must still fulfill regular 99214 criteria through either moderate complexity medical decision-making (MDM) or 30 to 39 total minutes of provider time on the date of service.

WATCH THIS BEFORE PURCHASE - DATIO POS SYSTEM FOR 10-INCH AMAZON FIRE TABLET COMPLETE CASH REGISTER

9 related questions found

Does POS 10 need a modifier?

Yes, Place of Service (POS) code 10 typically requires a telehealth modifier like 95 for real-time audio-video or 93 for audio-only services.

Modifier Requirements for POS 10

  • Audio-Video Visits: Attach Modifier 95 to your CPT/HCPCS code to show the encounter happened via live, two-way interactive video and audio.
  • Audio-Only Visits: Attach Modifier 93 if the patient only used a phone and video was not available or not consented to.
  • Payer Discrepancies: Always check commercial, Medicaid, or Medicare Advantage rules, as some individual payers consider certain modifiers redundant or require specific legacy codes (like GT) depending on your provider type.

What does POS 20 mean?

POS 20 means Urgent Care Facility in medical billing and coding.

It is a standardized two-digit Place of Service (POS) code created by the Centers for Medicare & Medicaid Services (CMS). Healthcare providers put this code on insurance claims to show that a medical service happened at a certified urgent care center rather than a regular doctor's office or a hospital.

What POS 20 Covers

  • Setting Type: A walk-in clinic that treats unscheduled, non-life-threatening illnesses and injuries for patients who arrive without an appointment.
  • Distinction: It separates urgent care from other locations like a standard private office (POS 11), a walk-in retail clinic (POS 17), or a hospital emergency room (POS 23).

Why It Matters

  • Accurate Payment: Insurance companies use this code to calculate proper reimbursement rates and decide how practice expenses are covered.
  • Claim Approval: Using the wrong code (like billing an urgent care visit as a standard office visit) can cause claim rejections, payment delays, or compliance audits.

Is POS 11 used for outpatient services?

Place of Service (POS) code 11 is strictly an outpatient code used to indicate services performed in a private, independent physician's office or clinic.

What POS 11 Means

  • Setting: An independently owned, non-hospital-affiliated office or practice.
  • Type of Care: Ambulatory care where a patient arrives, receives a routine examination, diagnosis, or treatment, and leaves the same calendar day.
  • Reimbursement: Qualifies for higher non-facility payment rates because the provider covers their own building overhead, staff, and equipment costs.

When to Use POS 11

  • Routine primary care visits and follow-ups for chronic conditions.
  • Preventive and wellness exams.
  • In-office minor procedures, diagnostic tests, or behavioral health counseling sessions held in a private clinic.

When NOT to Use POS 11

  • Hospital Outpatient Clinics (POS 22 or POS 19): Do not use code 11 if the clinic is owned and operated by a hospital.
  • Inpatient Stays (POS 21): Never use code 11 if a patient is admitted to a hospital overnight.
  • Emergency Rooms (POS 23): Use specific emergency department codes instead.

You can review the official rules through the Place of Service Code Set from CMS.

What is POS 19 used for?

Place of Service (POS) code 19 is used in medical billing to designate an off-campus-outpatient hospital setting.

When to Use POS 19

  • Off-site provider-based departments: Applied when a patient receives care at a hospital-owned facility, clinic, or diagnostic center located away from the main hospital campus.
  • Non-hospitalized care: Used for diagnostic, therapeutic (surgical and non-surgical), and rehabilitation services for patients who do not need an overnight stay or formal inpatient admission.

Key Details & Rules

  • Distinction from POS 22: POS 22 is used for on-campus outpatient hospital departments, whereas POS 19 specifically tracks care at separate, off-site hospital-affiliated locations.
  • Distinction from POS 11: It differs from a standard private office (POS 11) because the facility is owned and operated as part of a hospital system rather than an independent private practice.
  • Reimbursement: Claims submitted with POS 19 are generally paid at the facility rate rather than a non-facility rate.

You can review the official definitions and updates through the Centers for Medicare & Medicaid Services Place of Service Code Set.

Can a CPT code be billed with POS 11?

Yes, many CPT codes can be billed with Place of Service (POS) code 11, provided the service actually takes place in a non-hospital-affiliated, provider-owned or leased office setting.

POS 11 stands for "Office" and indicates that the practice covers all overhead costs like rent, staff, and equipment, which usually qualifies the claim for higher non-facility reimbursement rates.

Common CPT Codes Billed with POS 11

  • Evaluation and Management (E/M) codes: Office visit codes such as 99202–99215 (new and established patient outpatient visits).
  • Routine and preventive exams: Annual physicals and wellness visits.
  • Minor procedures and diagnostics: In-office injections, skin biopsies, or basic ECG tests done in an ambulatory practice setting.

Important Rules to Remember

  • Match the physical location: The POS code must always match where the patient physically receives the care. Using POS 11 for a service performed in a hospital outpatient department (such as POS 22) is considered incorrect and can lead to claim audits or denials.
  • Check code compatibility: Not every CPT code is approved for an office setting; surgical or inpatient-only procedures require specific facility POS codes.
  • Review fee schedules: Payer guidelines dictate whether a specific CPT code pays at a non-facility rate for POS 11.